LOBA 2.0TFSI Upgrade High Pressure Fuel Pump (Upgrade HPFP) & Cam follower



We take a brand new factory OEM pump for reliability, then we make fundamental changes using new components and processes by LOBA to create this upgrade fuelling solution. Also Included with this upgrade are OEM Cam follower and OEM Pump O-ring seal.

More details

£ 685.00

More info

Modification and tuning of the 2.0TFSI engine way beyond OEM power levels requires an extra volume of high-pressure fuel. The LOBA 2.0 TFSI high pressure fuel pump will give a fuel volume increase of more than 50% and can sustain over 135bar making it the one of the biggest flowing pumps on the market. Also suitable on a stock software car.
The LOBA uprated fuel pump allows much more power throughout the rev range but specifically in the midrange on cars where the stock pump is insufficient.

The materials and processes we decided upon are of the highest possible quality and for this particular application, this meets the very high requirements needed for the latest generation of OEM HPFP specifications. Multiple stages of various precision machining, hardening processes, coating processes and quality control inspections characterize this LOBA pump.

Tested to over 8250rpm both in a controlled environment and on the track/road to simulate a large range of dynamic conditions. Doing so was an important part of our mechanical design parameters to ensure the LOBA pump meets our standard. Results are reliability, durability and performance.

Key Points:

LOBA Special nitrided chrome silicon vanadium steel main spring (tested to specific strength/grade)
LOBA Specially heat treated piston and cylinder (at specific hardness's)
LOBA Special DLC coating processes of piston
LOBA Special nano ceramic coating of piston and cylinder
LOBA Optimized clearances of components
LOBA Piston and cylinder are precision matched parts
Each LOBA uprated pump is assembled in a clean room environment
Each LOBA uprated pump is precisely inspected and tested and pre-lubed
OEM High pressure fuel pump
OEM Cam follower included
OEM Pump O-ring seal Included (Pre-fitted)
Fully checked, tested and ready for installation
Direct OEM stock replacement, Plug & Play
Made in Germany

The LOBA upgrade high pressure fuel pump comes pre-assembled pre-lubed using a special chemical anti-wear and anti-friction lubricant,
giving extra protection on initial start-up.
Complete with OEM seal and a factory brand new OEM cam follower for extra value and to ensure long term reliability.

Fitting must be done by a professional, it is also recommended that the new OEM cam follower supplied is fitted with the LOBA pump for reliability, regardless of the condition or limited use of the old follower.

Please note this item is shipped direct from our supplier in Germany (special order item) and stock figures are not real-time.

UK Shipping Only - Please email for a quote outside of the UK

2 other products in the same category: